-
SC or LC Fiber Patchcord or fiber jumper
• Ceramic ferrule.
• High packing density for smaller panel space.
• Meet RoHS requirements.
• Compliant Telcordia GR-326-Core.
-
MPFS PLC Splitter
• Compact Design in plastic box or LGX or 19” 1RU.
• Low insertion loss.
• Excellent port-to-port uniformity.
• Wide Operating Wavelength: 1260nm ~ 1650nm.
-
GWR3300 Quad Return Path receiver
• Four independent return path receivers in 19” 1RU.
• Two stages low pass filters.
• 5~200MHz Return path RF.
• RF output continuously adjustable at front panel.
-
GTC250 Terrestrial TV Frequency Converter
• Capture full VHF & UHF channel, convert 32 channels.
• Integrated Pre-Amplifier and Automatic Gain Control (AGC).
• 4 inputs to select the best signal from VHF/UHF/FM optimized antennas.
• Adjustable output level up to 113 dBμV with 6 active channels.
• Intuitive key pad programming with LCD display for output channel conversion.
• Automatic LTE filter selection to minimize 4G signal interference.
-
GLB3500MG GNSS over fiber
• GNSS service available via Tunnel, Metro, Indoor fiber.
• Maximum 18 GNSS or GNSS simulator signals over one fiber.
• Dropping one GNSS signal every 100~300m fiber.
• 1 Optical transmitter supporting 18 GNSS transceivers.
-
GLB2000A-K Terr TV and Fiber Optic Twin LNB
• Compact plastic flame retarding housing.
• Optical AGC range: -6dBm ~ +1dBm.
• Output Terr TV + Horizontal (LHCP)@18V from sat STB.
• Output Terr TV + Vertical (RHCP)@13V from sat STB.
• Powered by satellite STB.
• Working with GLB3500A-2T transmitter.
• Option: WDM port to GPON or XGPON ONU.
• Option: supporting 4 satellite STBs.
-
GLB3500M-4D Four Satellites DWDM FTTH with GPON
• Four dCSS static mode LNBs and Terr TV FTTH.
• Selected 32 UBs by static dCSS LNB: 950MHz to 2150MHz.
• Reverse 14V DC to dCSS LNB.
• Terrestrial TV bandwidth: 174~806MHz.
• Four DWDM wavelengths in the range of optical amplifier.
• AGC on optical transmitter and receiver.
• Each optical receiver has four RF outputs.
• Each RF output has access for the four satellites.
• WDM Port for GPON or XGPON ONU.
-
GSC5250 Super Capacitor Battery
• 48V 5250Wh UPS batteries for optical nodes.
• Including 70pcs 4.2V21000F super capacitors.
• More than 20000 cycle times.
• 50A 140 minutes charging time.
• 300A Max Peak Discharging time 3ms.
• 12V and 36V Super capacitor batteries Optional.
-
GWR1000M CATV MiniNode
• One 1000MHz/1218MHz 20dBmV Output
• 42/54MHz or 85/102MHz Diplexer
• One forward fiber and one upstream fiber
• 15V DC Remote Power over cable
-
GSS32 Satellite to Satellite Converter
- 4 Independent Satellite Inputs with reverse DC to each LNB
- Digital Filtering maximum 24 transponders from one sat input
- Total 32 transponders selected from 4 sat inputs to one output
- Local LCD Management and WEB management
-
GWD800 IPQAM Modulator
• Three pluggable IPQAM modules in one 19” 1RU.
• Each IPQAM module has 4ch IPQAM RF output.
• Gigabit IP Input supports UDP, IGMP V2/V3.
• Supporting TS re-muxing.
• RF output supports DVB-C (J.83A/B/C), DVBT, ATSC.
-
GLB3500E-4R Nilesat and Arabsat over two fibers to one home
• Nilesat wideband LNB carried by fiber 1 GLB3500E-2T transmitter.
• Arabsat wideband LNB carried by fiber 2 GLB3500E-2T transmitter.
• GLB3500E-4R has Two SC/APC fiber inputs and one RF output.
• Optical AGC range: -6dBm ~ +1dBm.
• Sat RF Outputs: 1210MHz, 1420MHz, 1680MHz, 2040MHz.
• One SatCR RF port for up to 4 unicable sat receivers.
• Complied with EN50494+EN50607 standards.
• Option: Two SatCR RF ports for up to 8 unicable sat receivers.
• Optional WDM port to GPON ONU.